
IMPACT TESTER
충격 시험기
I 파이프전용충격시험기
PIPE IMPACT TESTER
PIPE IMPACT TESTER


Features
Features

3 cups
Blueberries
Vaccum lifting
weight is lifted
in ms after impact
to prevent double bouncing
Free falling
better than 95% of
thoretical free fall speed
User safety
weight will fall down very slowly in case of power failure
Sliding doors with sensors
V-block for pipe
from 32 mm diameter
up to 2,000 mm
(dependant on model)

3 cups
Blueberries
Vaccum lifting
weight is lifted
in ms after impact
to prevent double bouncing
Free falling
better than 95% of
thoretical free fall speed
User safety
weight will fall down very slowly in case of power failure
Sliding doors with sensors
V-block for pipe
from 32 mm diameter
up to 2,000 mm
(dependant on model)
Accessory
Accessory
-
Adaption of the impact tester to suit operation in an ambient temperature down to -15 ℃
-
Storage rack for appropriate storage of failling weights
-
다양한 falling weights
-
Adaption of the impact tester to suit operation in an ambient temperature down to -15 ℃
-
Storage rack for appropriate storage of failling weights
-
다양한 falling weights
Application
Application
-
ISO 3127 : Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids _ Determined and specification of resistance to external blows
-
EN 744 : Plastics piping and ducting systems_Thermoplastics pipes _Test method for resistance to external blows by the round-the-clock method
-
EN 1411 : Thermoplastics pipes _ Determination of resistance to external blows by the staircase method
-
ASTM D2444 : Standard test method for determination of the impact resistance of thermoplastic pipe and fitting by means of a tup (Falling weight)
-
ISO 3127 : Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids _ Determined and specification of resistance to external blows
-
EN 744 : Plastics piping and ducting systems_Thermoplastics pipes _Test method for resistance to external blows by the round-the-clock method
-
EN 1411 : Thermoplastics pipes _ Determination of resistance to external blows by the staircase method
-
ASTM D2444 : Standard test method for determination of the impact resistance of thermoplastic pipe and fitting by means of a tup (Falling weight)